SMC table-tennis table is a typical fitness equipment. At present, the mainstream production method is a one-time molding process of hydraulic press machine. This production method is efficient and fast, and the product has high pressing precision. The main production equipment is hydraulic press machine, SMC table tennis table top forming mold and mold temperature machine and other equipment. The process of molding the SMC table tennis table with a hydraulic press machine.
2、The mold installation must be level, and ensure that the installation position is in the center of the press table. Before pressing, the mold should be thoroughly cleaned and a release agent should be applied. Use clean gauze to wipe the release agent evenly before feeding, so as not to affect the appearance of the product. For new molds, oil must be removed before use.
3、Add material to the mold.
4、When the material block enters the cavity, the hydraulic press machine moves down rapidly. When the upper and lower molds are matched, the required molding pressure is slowly applied, and after a certain curing time, the molding of the product is completed. During the molding process, various molding process parameters and press operating conditions should be reasonably selected.
The SMC table-tennis table top forming hydraulic press machne is a commonly used hydraulic press for molding FRP products. It is mainly suitable for molding LFT-D, SMC, BMC, GMT, FRP, GRP, RTM and other thermosetting and thermoplastic materials. Widely used in automobiles (bumpers, bottom guards, deflector ceilings, etc.), railway vehicles (high-speed train interiors), building materials/buildings (cement baffles, buried pipes, etc.) and electronic/electrical fields (meter boxes, etc. ) in the molding process of thermosetting and thermoplastic products such as parts and components.
+86-769-8306-1993
E-mail
