Picture Show
DSBS-500C 4 Column Hydraulic Press
Product Application
1. Stamping , forming , shallow , drawing and pressing assembly etc.
2. Forming of spectacle parts, lock parts, metal hardware, pressing assembly of electronic connectors , electric components and rotor & stator of motor etc.
3. Suitable for cold forging, warm forging, hot forging, and applicable to liquid metal forming and ceramic powder metallurgy pressing forming.
Video
Technical Parameters
DSBS-A Cylinder Half Type Single Movement Hydraulic Press
| Model | Units | Specifications | ||||||||||
| DSBS-10 | DSBS-20 | DSBS-50 | DSBS-100 | DSBS-200 | DSBS-300 | DSBS-500 | DSBS-800 | DSBS-1000 | DSBS-2000 | |||
| Main cylinder capacity | ton | 10 | 20 | 50 | 100 | 200 | 300 | 500 | 800 | 1000 | 2000 | |
| System pressure | Mpa | 13 | 13 | 13 | 20 | 25 | 25 | 25 | 250 | 25 | 25 | |
| Main cylinder stroke | mm | 250 | 300 | 300 | 200 | 150 | 150 | 150 | 160 | 250 | 400 | |
| Open height | mm | 400 | 450 | 450 | 450 | 450 | 450 | 500 | 700 | 700 | 900 | |
| Working table height | mm | 820 | 820 | 820 | 850 | 850 | 900 | 1000 | 1100 | 1100 | 1350 | |
| Working tabel size | L-R | mm | 400 | 400 | 450 | 450 | 500 | 550 | 700 | 850 | 900 | 1500 |
| F-B | mm | 400 | 400 | 450 | 450 | 500 | 650 | 800 | 950 | 950 | 1500 | |
| Master cylinder speed | Down speed | mm/s | 150 | 130 | 100 | 100 | 100 | 135 | 110 | 110 | 190 | 200 |
| Press speed | mm/s | 30 | 20 | 15 | 15 | 15 | 5 | 4 | 3 | 3-10 | 3-10 | |
| Return speed | mm/s | 150 | 130 | 100 | 100 | 100 | 100 | 100 | 100 | 180 | 180 | |
| Motor power | kw | 2.2 | 3 | 4 | 5.5 | 5.5 | 7.5 | 15 | 18.5 | 45 | 55*2 | |
The above parameters are for reference, ordering the contract shall prevail.
DSBS-A series can according to customer's requirement.
Product Advantage
1. Use servo control system to save energy 50-70%.
2. Pressure stability, pressure error ±1bar, repeatable positioning accuracy up to±0.02mm.
3. Low failure rate, automatic alarm and fault indication, one-button reset function.
4. Remote maintenance service can be realized.
5. Can set up multi-stage pressure, multi-speed and continuous fixed-pressure function.
6. Adopting an integral frame structure, high strength, low distortion and durability.
7. Eight-sided rigid guide rails have good guide precision, strong side pressure resistance and easy maintenance.
8. Suitable for cold forging, warm forging, hot gorging, and applicable to liquid metal forming and ceramic powder metallurgy pressing forming.
Safety Measures:
● Two-handed Schneider start buttons on the front side of the bed table
● Safety photoelectric light curtain on the front side of the bed table, covering the whole daylight open
● Emergency stop button on the front side of the bed table, manual reset required
● Pneumatic safety ratchet bar to prevent the sudden fall of the slider, in case of any error happened to the hydraulic system
● Interlocked safety mesh shield covers the left/right/rear side of bed table, can be opened and removed.
● NEMA style electric control cabinet with electric disconnect switch
● Working indicator: triple color indicating light (green/yellow/red)
Manufacture Ability
Certifications
Service Cases
+86-769-8306-1993
E-mail
